Talking flight monitor 7.0.0 Release notes

Hi again everyone!

It has been a few weeks since we last had an update. This update is going to be a huge one! So, let’s get started shall we? This update sees a few priority boarding members move into a stable state, there are some new priority boarding members, and an update on first officer flows. I would also like to make a note that as of TFM 7.0.0 (this release), we will no longer actively participate in developing new features for MSFS2020. We now consider support for it end of life. Watch the video.

Stable priority boarding members

The following priority boarding members have been moved to a stable release.

• GSX – Ground services
• SimBrief – Create a SimBrief flight plan
• SimBrief – View a SimBrief flight plan
• MSFS 2024 – All MSFS 2024 features

New priority boarding members

The following are new priority boarding members and can be enabled or disabled by going to TFM settings, priority boarding, then checking/unchecking the features and pressing the save button. NOTE: you must restart TFM for the newly enabled features to take effect.

• Advanced PMDG737/777 FMC – An html-based FMC with new features, tutorials, context sensitive help, and easier to read layout.
• Enhanced on demand hotkeys – Requires the new PMDG FMC above. A new set of on demand hotkeys with new features. Most hotkeys in this set are situational hotkeys: distance to destination/TOD, next waypoint. Other hotkeys reuse the same data as before.
• SimBrief uplink – Requires the new PMDG FMCs above. An automated workflow to configure the FMC with your current SimBrief flight plan.

New FMCs and on demand hotkeys

We took the time over the past few weeks and rewrote the entire PMDG737/777 FMCs. They are HTML content, so you can use your assistive technology’s web content reading commands to navigate and read the FMC. It is a better format to use than our now dubbed ‘classic PMDG FMCs’, which will remain the default in any new TFM install until the web versions become the default. Features for our new PMDG FMCs include the following.

• WCAG 2.1 AA compliant.
• Read and navigate the screen with web reading commands in your assistive technology.
• Context sensitive help screens.
• A tutorial or walkthrough for most pages.
• A section where all FMC settings live.
• * Different themes, font sizes and layouts to pick from.
• Easier to read layout of FMC and settings screens.
• New scratchpad
• New indicator/annunciators bar
• New FMC message announcement system.

The new enhanced hotkeys are the on demand hotkeys found under the TFM control key (the TFM key). These situational awareness hotkeys have been modified to include information from the web version of the PMDG FMC to enhance situational awareness. For example, next waypoint hotkey will now give the waypoint name, distance to that waypoint, and ETA. Remaining fuel reports current load, fuel burn, and landing fuel (EG: 8.1). Distance to destination reports total distance, ETA, and landing fuel. Now, the distance to top of descent hotkey will report distance to top of climb if not at cruise yet, then the distance to descent when past top of climb. Most other hotkeys use the original data but have been formatted better. EG: Auto pilot altitude in the PMDG aircraft reports current AP altitude and cruising altitude. The Auto pilot status hotkey now reports (PMDG only) MCP status: auto pilots, flight directors, auto throttle. There are 14 of these revised hotkeys, so have fun taking a look at them. Be sure to let us know if there are problems or if you have any feedback.

SimBrief uplink for PMDG aircraft

To complement our first officer, we created SimBrief uplink. It is a feature that will automatically configure the FMC for your PMDG aircraft. Note: You must have a generated flight plan for your desired PMDG aircraft and have chosen that aircraft from the TFM menu before using SimBrief uplink. Navigate to TFM’s main menu, then aircraft, then FMC, then SimBrief uplink. When the view appears, TFM will notify you if the flight plan was loaded. If so, press OK to continue to the uplink view. In this view, you can either start the uplink or choose what sections of the FMC the uplink will pre-configure. Any unchecked boxes are the pilot’s responsibility. When ready, press the start uplink button and wait for the status reports to mention that uplink is complete. With this new uplink, you will never have to manually program the FMC again!

First officer checklists

It is our intent to create default checklists for first officer. They can be used as a regular set of checklists, or until you can create your own in the checklist editor. We were unable to finish the flows before this release. However, when they are done, we will put them on the website as a different download.

Bug fixes

The following are bug fixes in this release.

• 739 – TFM can now see extra fuel tanks when they are enabled.
• PMDG737/777 – To convert between LBS/KGS for fuel and weights, use the metric setting in TFM’s user interface settings.
• SimBrief flight plan viewer – You can now navigate the read only edit controls with your cursor. All other text selection functions work.

This is about all we have for this release. If you have any comments, questions, or feedback, don’t forget to send them to info at talkingflightmonitor dot com or in your support portal. Until then, happy flying!